Videos & Tutorials

Learn how to use Eclipse Audio software products for filter design, loudspeaker preset creation & measurement averaging.

Quick workflow overview

FIR Designer Workflow #1: The Import Tab

How to load & adjust measurements for use in filter design.

FIR Designer v3.0 Extended Overview

FIR Designer M v1.0 Extended Overview

Guides & Case Studies

A comprehensive guide to fundamental FIR filter concepts & applications in loudspeakers.

See a list of FIR-capable products (amplifiers, processors, media managers, players & plugins) including file formats and specific loading instructions.

Learn about the various ways you can work with IIRs in our software

This case study demonstrates step-by-step how FIR Designer can be used to tune a system using only IIRs (no FIRs)

Learn why some filters produce different results when used across processor brands.

Learn how to use FIR Designer’s built-in digital signal processor & audio player

The resulting FIR filters in this tutorial include the crossover responses and linearise the loudspeaker phase everywhere except at the loudspeaker’s low frequency roll-off. Sample measurements provided are taken from a 5″ coaxial loudspeaker. READ MORE

This tutorial describes how to adjust the magnitude & phase of a full range loudspeaker, using a FIR filter. Sample measurements provided are taken from a 12″ + horn install loudspeaker. READ MORE

This step-by-step guide explains how to use FIR Designer to upsample an existing FIR filter from 48 kHz to 96 kHz.

This step-by-step guide explains how to use FIR Designer to match the magnitude & phase responses of different makes & models of loudspeakers in a single installation.

Learn how to use FIR Designer’s integrated SMAART® Control to take a spatially averaged measurement with a single microphone, rather than averaging the response of multiple microphones at fixed positions.

SpeakerMeasure Quick Start Guide (PDF)

Using SpeakerMeasure to find loudspeaker maximums (SynAudCon tutorial)

More Videos | Features & Functionality

See all videos on our Youtube Channel

Please note, many videos feature older software versions that don’t include more recently-added features.

Auto IIR in FIR Designer v4.2

auditionDSP in FIR Designer M v4

New Features in FIR Designer M v2

Smaart® Control in FIR Designer v2.12

Switching to Dark Mode in FIR Designer M v4.3

Supplementary Responses in FIR Designer v3 & 4

Averager

Direct-to-Processor Function in FIR Designer v2.3 (Lake)

Using Impedance Measurements in FIR Designer v3

Measurement Averaging in FIR Designer 2

Manual IIR Conversion between brands (FIR Designer M v1.3)

Rewindowing in FIR Designer v2.1

Gain/Polarity/Delay + Summary Output in FIR Designer v2.2

Side-Loading within DTP in FIR Designer v2.3